VENUE ACOUSTICS · MÁLAGA
Acoustic measurements and sound control in Málaga
We identify what is happening in your space to determine the work it needs.
Poor speech intelligibility, noise transmission and uneven sound levels are different problems. We review the use of the space, the system and the measurements required before proposing a solution.
Discuss your acoustic issueTHREE DIFFERENT REQUIREMENTS
Inside the room
Acoustic treatment: clarity and the behaviour of sound.
Between spaces
Sound insulation: transmission into other areas.
Within the system
Control: coverage, tuning and system levels.
WHERE WE START
Measure to identify the problem
Noticing a problem is the starting point. Measurements help describe it and determine where to intervene.
Depending on the issue, we assess system response, sound level distribution, differences between zones and room behaviour. This helps establish whether the cause is configuration, coverage or room acoustics.
The scope of the assessment depends on the activity and the problem you need to resolve.
Acoustic treatment
To improve listening conditions within the space.
When speech is difficult to understand, sound lacks definition or reverberation is excessive, we assess the room’s behaviour and the treatment that could help.
Acoustic treatment addresses the room’s internal response and intended use: conversation, music, presentations or performances.
Sound insulation
To assess sound transmission between spaces.
If sound reaches other areas, we need to assess the building elements, weak points and transmission paths.
We study the project requirements before proposing work. Sound insulation and acoustic treatment serve different purposes and must be assessed separately.
Limiters and level control
Installation, configuration and tuning of limiting systems to suit the project requirements.
To assess the work, we need to understand the existing installation, the activity and the specific requirements the system must meet.
Acoustics and sound systems working together
Loudspeaker position, coverage and processing affect how an installation sounds. Reviewing these alongside the room helps us tune the complete system.
If you are fitting out a venue or upgrading its system, we can include this assessment in your audiovisual installation project.
What we need to know about your space
Activity and location
Type of venue, location, everyday use and approximate layout of the different areas.
What happens and when
Describe what you notice, where it happens and under what conditions: with music or speech, at particular levels or in specific areas.
System and background
Tell us which equipment is installed and whether you have previous measurements or requirements we should consider.
Describe the problem. We will start there.
Tell us what is happening in your venue and what needs to improve. We will advise on the assessment and scope of work.